Insignia NS-BRDVD Maintaining

Insignia NS-BRDVD Blu-ray Disc Player

Panel Display	Selects the brightness level for the display on	Cleaning discs
	the front of your player. You can select:	• Before playback, wipe the disc outwards from
	• Auto—The display gets darker during	• Before playback, wipe the disc outwards from
	• Auto—The display gets darker during	the center with clean cloth.
	playback.	the center with clean cloth.
	playback.
	• Bright—Makes the display brighter.
	• Dimmer—Makes the display darker.

Slide Show	Select the amount of time a JPEG is displayed
	before your player displays the next JPEG. You
	can select 5sec or 10sec.

Media Select	Select the type of media for playback. You can
	select Disc or SD Memory.	Cleaning the disc lens
Resetting setup options to the defaults		If your player still does not perform correctly after
		you try the solutions in “Troubleshooting” on

	Resetting the setup options to the defaults does	page 31, the laser optical pickup lens may be
	not reset the parental controls.
		dirty. Consult your dealer or an authorized

	To reset setup options to the defaults:	service center for inspection and cleaning of the
		laser optical pickup lens.
	1 Press SETUP.

2Press or to select , then press ENTER. The Initialize menu opens.

3Press or to select Restore Defaults, then press ENTER.

4Press ENTER again.

5Press SETUP to close the menu.

Maintaining

Cleaning the cabinet

Checking the remote control signal

If the remote control is not working correctly, you can use an AM radio or digital camera (including a cellular phone with built-in camera) to see if the remote control is sending an infrared signal.

To check the signal with an AM radio:

1Tune the AM radio to a non-broadcasting frequency.

2Point the remote control towards the radio, then push any button and listen. If the sound from the radio flutters, the remote control is working.

To check the signal with a digital camera:

1Point a digital camera towards the remote control.

2Push any button on the remote control and look at the camera's LCD viewfinder. If the infrared light appears on the LCD, the remote control is working.

Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia, or abrasive cleaners. They may damage the cabinet.

Handling discs

•To keep a disc clean, do not touch the play side (non-label side) of the disc.

•Do not attach paper or tape to the disc.

•Keep the disc away from direct sunlight or heat sources.

•Store the disc in a disc case after you remove it from your recorder.