Insignia
Connecting a digital audio optical system
To connect a digital audio optical system:
1Make sure that your player and the TV are turned off.
2Connect one end of a digital audio optical cable (not provided) to the DIGITAL OUT (PCM/BITSTREAM) OPTICAL jack on the back of your player.
Connect the AC power cord
To connect the power cord:
1Connect one end of the AC power cord to the AC IN jack on the back of your player.
AC power cord
Digital audio optical cable
3Connect the other end of the cable to the DIGITAL AUDIO OPTICAL INPUT jack on the digital audio system.
Connecting a receiver with HDMI
To connect a receiver with HDMI:
1Make sure that your player and the TV are turned off.
2Connect one end of an HDMI cable (not provided) to the HDMI OUT jack on the back of your player.
HDMI cable
HDMI cable
3Connect the other end of the cable to the HDMI IN jack on the receiver.
4Connect an HDMI cable to the HDMI OUT jack on the receiver.
5Connect the other end of the cable to the HDMI IN jack on the TV.
2Connect the other end of the AC power cord into a power outlet.
Note
Make sure that the AC power cord is connected securely. If the cord is loose, your player will generate noise or static.
Setting up speakers
To set up speakers:
•Use the following illustration as an example:
Left front |
| Right front |
| Center | Subwoofer |
|
| |
Surround left |
| Surround right |
Surround |
| Surround |
back left |
| back right |
Adjusting speakers
You can specify the speaker size and adjust the speaker volume and delay time.
Note
You can also access HDMI Audio option from the
Quick menu.
To adjust speakers:
1Press SETUP.
2Press or to select , then press ENTER. The Custom menu opens.
Custom
3Press or to select Audio, then press
ENTER.
4Press or to select HDMI Audio, then press ENTER.
5Press or to select HDMI Multi(LPCM), then press ENTER.
10 |