Insignia
7Turn the MASTER VOLUME dial or press the VOLUME / buttons to adjust the sound level.
OR
Press the MUTE button to turn the sound off. MUTE flickers on the display. Press the MUTE button again to turn the sound back on.
To adjust the tone:
1Press the TONE MODE button to enter the tone mode. The tone mode is displayed for several seconds.
Note
When EXTERNAL IN is selected as an input source, you can not select the tone mode or adjust the tone.
2Press orto select the tone mode.
OR
Note
Each time you press these buttons, the tone mode changes as follows:
•OFF: To listen to a program source without the tone effect. DIRECT appears on the display.
•ON: To adjust the tone to your taste. DIRECT disappears from the display.
3With the Tone mode set to ON, press the or .
OR
Note
Each time you press these buttons, the tone mode changes as follows:
•BASS
•TRBL
•TONE ON
4Press or to adjust the tone.
Notes
•The tone level can be adjusted within the range of
•In general, we recommend the bass and treble to be adjusted to 0 dB (flat level).
•Extreme settings at high volume may damage your speakers.
•To complete tone adjustment, or if the tone display disappears, repeat this procedure.
Surround sound
This receiver incorporates a sophisticated digital signal processor that allows you to create optimum sound quality and sound atmosphere in your personal home theater.
Surround modes
DTS Digital Surround
DTS Digital Surround (also called simply DTS) is a
It also provides wide dynamic range and separation, resulting in magnificent sound.
DTS and DTS Digital Surround are registered trademarks of DTS, Inc.
Dolby Digital
Dolby Digital is the
bearing the includes the recording of up to
5.1channels of digital signals, which can reproduce much better sound quality, spatial expansion, and dynamic range characteristics than the previous Dolby Surround effect.
11 |