Insignia
2Connect the AM loop antenna to the receiver.
12
AM Loop Antenna
AM Outdoor Antenna
FM 75Ω
Ground
AM Loop
Note
Place the AM loop antenna as far as possible from the receiver, television, speaker cords, and the AC cord. Change the position of the antenna until you get the best reception of your favorite AM stations.
Note
To improve reception, you may use an outdoor AM antenna instead of a loop AM antenna. Disconnect the indoor antenna before replacing it with an outdoor antenna.
Connecting video components
About video connections
Connector type | Quality |
|
|
Composite (RCA type plug) | Good |
|
|
Better | |
|
|
Component (Y, PB/CB, PR/CR) | Best |
|
|
To connect your video components:
1Connect your video cable to the receiver based on the type of device you are connecting.
Jack Device
VIDEO 1 VCR, DVD recorder or other digital recorder.
VIDEO 2 Cable or satellite box, DVD player, or LD player.
MONITOR Television, projector, or LCD monitor.
VIDEO 3 Camcorder or video game player. This jack is located on the front of the receiver.
2Connect the other end of the cable to the device.
Note
If you are using the component video connections, make sure that you are connecting Y to Y, PB/CB to CB, PB, or
Connecting components
| Note |
VIDEO 2 | When recording video sources through the |
| VIDEO 1 OUT jacks or viewing video sources |
VIDEO 1 | through the MONITOR OUT jack, you must use |
the same type of video jacks that you used to | |
| connect to the video playback components. |
|
|
Monitor
6 |