InSinkErator HC1100, GN1100 owner manual Parts & Components

Parts & Components

In general, you'll be installing a faucet above-sink, with a filter assembly and a heating unit below-sink. You'll also be connecting all of the plumbing. Under the sink you'll need a grounded electrical service outlet, a connection to the cold water line (not included), and enough space to install the filter and tank assemblies.

2.

4.

3.

1.

8.

5.

10.

6.9.

1.Dispenser Faucet (HC Model shown)

2.DuraTank™ Hot Water Tank

3.Filter Head & Bracket Assembly

4.F-201 Filter Cartridge

5.Two 3/8" x 3' Polyethylene Tubes

6.3/8" Brass Nut, Ferrule, and Tube Insert

7.6" Filter Vent Tube (not shown)

8.3/8" to 1/4" Quick-Connect Union Fitting (for GN1100 models)

or 3/8" to 1/4" Quick-Connect "Y" Fitting (for HC1100 Models)

9.Dispenser Faucet Mount O-Ring, Clamp Plate, 6 mm Nut and Installation Tool

10.Tank Mounting Bracket and Screws

Here's what a typical complete installation should look like when you're done: Note: Component placement should be such to avoid electrical outlet.

For Reference Only

SinkTop™ Switch

sold separately.

5