Integra DLV-100 instruction manual Top Features

Top Features	2
	STATUS
	POWER

3

AUDIO

RGB

ON/
STAND	BY

1

4

SOURCE		5
PC	CARD		AUTO
		ADJUST
		ACCESS

E

N

10

9

MENU

SELECT

	S-
PC	VIDEO
	CONTROL
	VIDEO

USB

T

E

R

6

7

PC CARD

CANCE L

8

1. Power Button (ON / STAND BY)

Use this button to turn the power on and off when the power is supplied and the projector is in standby mode.

2. Status Indicator

When this is lit red continually, it's warning you that the projection lamp has exceeded 1500 hours (1000 hours in High-Bright mode) of service. After this light appears, it is advisable to replace the projection lamp as soon as possible. (See page 44). In addition the message "The lamp has reached the end of its usable life. Please replace the lamp!!." appears continually until the lamp is replaced. If this light blinks red rapidly, it indicates that the lamp cover is not attached properly or the projector is overheated.

See the Power/Status Light Messages on page 45 for more details.

3. Power Indicator ( )

When this indicator is green, the projector is on; when the indica- tor is orange, it is in standby mode.

4. Source Button

Use this button to select a video source such as a PC, VCR, DVD player or PC Card Viewer (CompactFlash card).

Each time this button is pressed, the input source will change as follows:

→RGB → Video → S-Video → PC Card Viewer 

If no input signal is present, the input will be skipped.

5. Auto Adjust Button (RGB only)

Use this button to adjust Position-H/V and Pixel Clock/Phase for an optimal picture. Some signals may not be displayed correctly or take time to switch between sources.

6. PC Card Access Indicator

Lights while accessing a CompactFlash memory card.

7. Enter Button

Executes your menu selection and activates items selected from the menu.

8. Cancel Button

Press this button to exit "Menus". Press this button to return the adjustments to the last condition while you are in the adjustment or setting menu.

9. Select (▲▼ ) / Volume (+) (–) Buttons

▲▼: Use these buttons to select the menu of the item you wish to adjust.

When no menus appear, these buttons work as a volume control.

 : Use these buttons to change the level of a selected menu item.

A press of the  button executes the selection.

When the menus or the Viewer tool bar is not displayed, these buttons can be used to select a slide, or to move the cursor in Folder List or Slide List.

When the magnifying glass is displayed, these ▲▼  buttons move the magnifying glass.

10. Menu Button

Displays the menu.

10