Integra DLV-100 instruction manual Image Options, Keystone distortion, Lamp Mode

Image Options

Keystone

This feature corrects the keystone (trapezoidal) distortion to make the top of the screen longer or shorter to be the same as the bottom. Use the  or  buttons on the slide bar to correct the keystone (trapezoidal) distortion.

Keystone distortion Normal

NOTE: The keystone angle can be corrected between 30 degrees upward and 30 degrees downward at a 0 degree-projection angle.

Depending on the type of graphics being used, the picture may get blurred or keystone correction may not be possible when excessive keystone correction is used.

The idea is, the closer you are to native resolution, the better image you will see.

Lamp Mode

This feature enables you to select two the brightness modes of the lamp: High-Bright and Normal modes. The lamp life can be extended up to 1500 hours by using the Normal mode.

Normal Mode	This is the default setting.
High-Bright Mode	Select this mode to make the image brighten than
	in Normal mode.

NOTE: If you have selected the Normal mode, the lamp lights in High-Bright mode for one minute after the projector is turned on. After one minute the lamp will change to Normal mode.

Aspect Ratio (not available for RGB and PC Card Viewer)

Aspect Ratio allows you to select the best Aspect mode to display your source image.

When 4:3 is selected from the source (i.e. DVD player), the follow- ing selections will display:

Normal Zoom Wide Zoom Cinema

Standard	All 4 sides stretched	Left & Right	Left and right
4:3 Aspect		stretched	stretched

When 16:9 is selected from the source (i.e. DVD player), the following selections will display:

Normal Zoom Wide Zoom Cinema

16:9 image displayed	All 4 sides stretched	Left & right stretched	stretched to display
in 4:3 mode		Left and right	the true aspect

NOTE: You can select three image positions for Cinema: Top, center, and bottom.

See page 35 for setting image positions.

32