Remote Control Features
1.Infrared Transmitter
Direct the remote control toward the remote sensor on the projec- tor cabinet.
2.Standby/On Button
If the main power is applied, you can use this button to turn your projector on or put it in standby.
3.
Press this button to select an
4. Video Button
Press this button to select an NTSC, PAL, SECAM or NTSC4.43 compatible video source from a VCR, DVD player, laser disc player or document camera.
5. RGB Button
Press this button to select a video source from computer or compo- nent equipment connected to your RGB port.
Supplied Remote Control
5
6
7
11
12
13
INPUT
1
2
3
4
8
9
10
14
15
6. Auto Adjust Button
Use this button to adjust an RGB source for an optimal picture. Some signals may not be displayed correctly or take time to switch between sources.
7. Magnify + - Buttons
Use this button to adjust the image size up to 400%.
To change the position of the magnified screen, press one of the ▲▼ buttons to recall the magnifying glass, then use the ▲▼
buttons to move the screen.
8.Volume + - Buttons
Press + button to increase the volume and - button to decrease it.
9. ASPECT Button
Press this button to select the screen size.
10. Mute Button
This button turns off an image and sound for a short period of time. Press again to restore the image and sound.
NOTE: When the menu is displayed, a press of this button mutes an image and sound without turning off the menu.
11. PICTURE Button
Press this button to recall and display the
12. Freeze Button
This button will freeze a picture. Press again to resume motion.
13. Menu Button
Displays the menu for various settings and adjustments.
14. LAMP RESET Button
If the lamp has been turned on for more than 1,600 hours (Normal mode), the power to the unit will be cut off and no messages will be displayed. Press and hold down this button for 10 seconds or more while the unit is in
17 
16
15. ▲▼ (Select) Buttons
▲,▼: Use these buttons to select the menu of the item you wish to adjust.
, : Use these buttons to change the level of a selected menu item.
A press of the button executes the selection.
When the magnifying glass is displayed, these ▲▼ buttons move the magnifying glass.
16. Cancel Button
Press this button to exit "Menus". Press this button to return to the previous menu without storing the current settings or adjustments when you are in the submenu or adjustment screen.
17. Enter Button
Press this button to execute the selected item. When this is pressed, the adjustments and settings are saved, and the display is returned to the menu.
12
