Integra DLV-100 Problem Check These Items, Clock in the Image Options. See page 33 or

Common Problems & Solutions

Problem	Check These Items
Does not turn on	• Check that the power cable is plugged in and that the power button on the projector cabinet or the
	remote control is on.
	• Ensure that the lamp cover is installed correctly. See page 44.
	• Check to see if the projector has overheated or the lamp usage exceeds 1100 hours (up to 1600 hours
	: Normal mode). If there is insufficient ventilation around the projector or if the room where you’re
	presenting is particularly warm, move the projector to a cooler location.
No picture	• Use the menu to select your source (Video, S-Video, RGB or PC Card Viewer). See page 31.
	• Ensure your cables are connected properly.
	• Use menus to adjust the brightness and contrast. See page 31.
	• Remove the lens cap.
	• Reset the settings or adjustments to factory preset levels using the Factory Default in the Adjustment
	Menu. See page 33.
Image isn’t square to the screen	• Reposition the projector to improve its angle to the screen. See page 23.
	• Use the Keystone in the Adjustment Menu to correct the trapezoid distortion. See page 32.
Picture is blurred	• Adjust the focus. See page 23.
	• Reposition the projector to improve its angle to the screen. See page 23.
	• Ensure that the distance between the projector and screen is within the adjustment range of the lens.
	See page 14.
Image is scrolling vertically, hori-	• Use menus or Source button on the remote control or the cabinet to select the source you want to input.
zontally or both
Remote control does not work	• Install new batteries. See page 13.
	• Make sure there are no obstacles between you and the projector.
	• Stand within 22 feet (7 m) of the projector. See page 13.
Status indicator is lit or blinking	• See the Status Light messages above.
Cross color in RGB mode	• If Auto Adjust is off, turn it on. If Auto Adjust is on, turn it off and balance the image with the Position/
	Clock in the Image Options. See page 33 or 36.

When using the PC Card Viewer function

Problem	Check These Items
No picture	•	Is “PC Card Viewer” selected from the Source menu?
	•	Is the CompactFlash memory card seated in the PC CARD slot completely?
	• Are slide data stored in the CompactFlash memory card?
	•	Have the contents of the CompactFlash memory card been destroyed?
Part of a slide is not displayed	•	While an image with over 1024 768 dots is projected, several lines of information will be lost.
Contents of CompactFlash Card	•	Use a computer, etc., to repair the data.
are damaged

For more information contact your dealer.

46