Integra instruction manual Connecting the TUN-3.7, Connecting the 12V Trigger Jacks

Connecting the TUN-3.7—Continued

With (Remote Interactive), you can control your

-capable Integra/Onkyo CD player, TUN-3.7, and so on with your amp’s remote controller.

•To use , you must make an analog audio con- nection between your amplifier and each audio component.

Integra/Onkyo amplifier, etc.

Integra/Onkyo	jack
CD player, etc.

jack

TUN-3.7

	jack
Remote Interactive	cable
Dock, etc.

Notes:

•Push each plug in all the way to make a good connec- tion.

•Use only dedicated cables for connections.

cables are supplied with Integra/Onkyo tuners and players (DVD, CD, etc.).

•Some components, including the TUN-3.7, have two

jacks. They’re both the same, so use either one.

• jacks should be connected only to Integra/Onkyo components. Connecting them to another manufac- turer’s component may cause a malfunction.

•Some components may not support all functions. See the manuals supplied with your other Integra/ Onkyo components for more information.

Connecting the 12V Trigger Jacks

To have the TUN-3.7 turn on automatically when another component is turned on, connect the TUN-3.7’s 12V TRIGGER IN jack to a 12-volt trigger output on the other component with a miniplug cable.

Likewise, to have another component turn on automati- cally when the TUN-3.7 is turned on, connect the TUN-3.7’s 12V TRIGGER OUT jack to a 12-volt trig- ger input on the other component with a miniplug cable.

Amplifier, AV receiver, etc.

12 V TRIGGER OUT ZONE 2

TUN-3.7

CD player, etc.

12V TRIGGER

IN

17