Integra instruction manual Getting to Know the TUN-3.7, Front Panel, A B C

Getting to Know the TUN-3.7

Front Panel

A B C 4 5 6 7 8

9 J K L M

For detailed information, refer to the pages in parentheses.

AStandby/On button (19)

Sets the TUN-3.7 to On or Standby.

BStandby indicator (19)

Lights up when the TUN-3.7 is on Standby.

CCategory []/[] buttons (23, 26)

Used to select categories for satellite radio. With HD Radio stations, they’re used to select multicast channels.

DPreset []/[] buttons (27)

Used to select radio presets.

EDimmer button (9)

Adjusts the display brightness.

FDisplay button (24, 26)

Used to view various information on the display.

GBand button (19, 22)

*XM Radio/HD Radio reception requires C-HDXM tuner board.

Used to select radio bands, AM, FM, and so on. The bands available depends on the type of tuner board installed.

HTuning/CH []/[] buttons (19, 23)

With AM and FM, these buttons are used for tuning. With XM Radio, they’re used to select stations.

IAuto Scan button (26, 27)

Starts the Auto Scan function, which selects and outputs each radio preset in turn for 5 seconds.

JRemote control sensor (7)

Receives control signals from the remote controller.

KDisplay

See the next page.

LMemory button (27)

Used to store and delete radio presets.

MTuning Mode button (19, 23, 27)

With AM and FM, this button selects the Auto or Manual tuning mode. With XM Radio, it selects the search modes.

8