Manuals / Intel / Computer Equipment / Switch

Intel manual Specifications, 1000SX Advanced Physical specification

Models: 1000SX

1 45

Download 45 pages 47.35 Kb

Page 30

Specifications

5

Specifications

1000SX Advanced Physical specification

The 1000SX Advanced Module (Intel order code: ES500MSXA) has the following specifications:

Number of ports:	Three: 2 x Stack Interface Module
	and 1 x 1000Base-SX

Connector Types:
Stack Interface Module	26-position shielded plug
1000Base-SX	Duplex SC

Cable Types:
Stack Interface Module	Stacking Cable (ES500SC)
1000Base-SX	See 1000SX cables and distances

Link Lengths:
Stack Interface Module	1 meter (39 inches)
1000Base-SX	See 1000SX cables and distances

Default Settings:	Stack mode
	Auto-negotiation: enabled
	Spanning Tree: disabled

Dimensions	Width: 149mm (5.9in.)
	Height: 37mm (1.5in.)
	Depth: 238mm (9.4in.)

Weight (approximate)	0.235kg (0.63 lb)

27

Image 30

Intel manual Specifications, 1000SX Advanced Physical specification

Contents

for1000SX500SeriesAdvancedSwitchesModule User Guide1000SX Advanced Module for 500 Series Switches User GuideA23295-001 First edition OctoberCLASS LASER PRODUCT Quick StartC H A P T E R 1 Quick Start Turn off the switchRemove the plate covering expansion slot A Electrostatic Sensitive Device 1757 5042Single switch or switchor switch C H A P T E R 1 Quick StartVerify the links using the LEDs. For details about LEDs, see Chapter C H A P T E R 1 Quick Start3101 Getting to know the Module IntroductionInstalling the module IEEE 802.1 Q VLANs via this module VLAN policy restrictions Proprietary 500 series VLANs802.1 Q VLANs Multiple Spanning Tree ProtocolStatus Module LEDsUnderstanding the LEDs IndicatesC H A P T E R 2 Getting to know the Module Cable the module Cabling the moduleStand-alone Mode Cabling for a single switchStack Mode Cabling to a Matrix Module in a group of switchesNote Redundancy is not possible with the 510T Secondary Intel Express550T Routing Combine bandwidth on two modules Cabling to a Matrix Module Server Configure the module Configuring the module Combining port bandwidth of two modules To combine 1000Base SX port bandwidth using Intel Device View Map VLANs to IEEE 802.1 Q VLANs 2 Click 802.1Q Map Any VLANs detected and their mapped status are displayedC H A P T E R 4 Configure the module Note if nothing is entered in the VLAN ID field, no mapping occurs5 Click Close to apply the mappings C H A P T E R 4 Configure the module Specifications 1000SX Advanced Physical specificationModal bandwidth @ 850nm ConnectorFiber type 62.5 ∝m MMFC H A P T E R 5 Specifications The performance specifications areStacking Cable performance specification Differential skewC H A P T E R 5 Specifications Limited Hardware Warranty North America only Limited Hardware Warranty Europe only Returning a Defective Product RMA Federal Communications Commission FCC Statement TranslationWARNING Fiber-optic ports on 1000SX Advanced-Optical Safety Manufacturer DeclarationCLASS LASER PRODUCT AVERTISSEMENT WARNUNGAVVERTENZA ADVERTENCIASPage A P P E N D I X A World Wide Web & Internet FTP Automated SupportCustomer Support Technicians Customer Support http//support.intel.com News news//cs.intel.com