Fax Class 1 AT Commands, 5.1Fax Identity Commands | Intel 536EX

Fax Class 1 AT Commands

Fax Class 1 AT Commands

5

The 536EX chipsets implement the EIA-578 data/fax Class 1 AT command set standard. This AT command set allows a DTE (with Class 1 communication software) and a 536EX-based modem to communicate with Group 3 fax machines. In addition, these chipsets provide fax identity and test commands. Fax identity commands are described in Table 22; all other fax AT commands are provided in Table 24 on page 67.

5.1Fax Identity Commands

The fax identity commands are AT+FMFR?, AT+FMDL?, AT+FMI, AT+FMM, AT+FMR, and AT+FREV?. These commands respond back with modem manufacturer, product model, and product revision information.

Table 22. Fax Identity Command Descriptions

	Command	Default	Description

			Identifies Modem Manufacturer: This command causes the DCE to send a message to the DTE
			indicating the DCE manufacturer. This command is identical to ATI2 and AT+GMI.
	+FMFR?/+FMI	none	AT+FMFR?
	+FMFR?/+FMI	none	Intel Corporation
			Intel Corporation
			OK

			Identifies Product Model: This command causes the DCE to report the modem chipset name.
			This command is identical to ATI1 and AT+GMM.
	+FMDL?/+FMM	none	AT+FMDL?
	+FMDL?/+FMM	none	Intel 536EP V.92 Modem
			Intel 536EP V.92 Modem
			OK

			Identifies Product Version Number: This command causes the DCE to report the modem
			chipset revision level. This command is identical to ATI4 and AT+GMR.
	+FREV?/+FMR	none	AT+FREV?
	+FREV?/+FMR	none	536EP Release 4.28 - Dec 10 2001
			536EP Release 4.28 - Dec 10 2001
			OK

5.2Fax Class 1 Commands

The fax Class 1 AT commands are divided into three types: class selection and capabilities, data stream transfers, and silence-time timers. All fax mode commands, except the silence-time timers, must be the last command on the command line.

Each command may be used as follows:

+F<command>?	Reads current setting
+F<command> = ?	Reads permissible settings
+F<command> = <parameter>	Sets parameters
Note: To originate a call, answer, and hang up, use the ATD, ATA, and ATHn commands, respectively.
64	536EX Chipset Developer’s Manual

Intel Confidential

Image 64

Intel 536EX manual Fax Class 1 AT Commands, 5.1Fax Identity Commands, 5.2Fax Class 1 Commands, Intel Confidential

Contents

Developer’s Manual 536EX ChipsetJanuary Intel Confidential 536EX Chipset Developer’s Manual Contents Contents Figures Tables Revision History DateRevision Description Introduction 1.1Controllerless Modem Driver Overview Figure 1. WDM Driver Block Diagram 1.1.2Windows 95 and WindowsUser applications Kernel - ring0 Figure 2. VxD Mini Port Driver Block Diagram 1.2V.90/V.92 and V.34 Data Modes 1.3Modem Connection Overview Table 2. DCE-to-DCEData Rates for Each Mode Table 1. DTE-to-DCEData Rates for Each ModeTable 3. DCE-to-ISPData Rates for V.90 Mode 1.4.1Sending Commands Table 4. DTE-ModemData Rate Response Codes 1.4.2AT Escape Sequences 1.4.3Dial Modifier AT Command Summary Tables AT Command Summary TablesTable 5. Data Mode Command Summary Table 5. Data Mode Command Summary Continued Result code type AT Command Summary Tables Generate data mode calling tone Table 6. V.44/V.42/V.42 bis MNP Command Summary AT Command Summary Tables Table 7. Fax Identity Command Summary Table 8. Fax Class 1 Command Summary Table 9. IS-101Voice Command Summary Table 10. Voice DTE→DCE Character Pairs Table 10. Voice DTE→DCE Character Pairs Continued Table 11. Voice DTE←DCE Character Pairs Table 12. Dial Modifiers Table 11. Voice DTE←DCE Character Pairs ContinuedTable 13. S-RegisterSummary Table 13. S-RegisterSummary Continued Data Mode AT COMMANDS Data Mode AT COMMANDS Table 14. Data Reporting Wn Mapping Figure 3. Example of a Remote ConnectionATW0 •ATW2 Intel Confidential +FMFR?, +FMDL?, +FREV? 3.7Hanging Up Hn, S10, Zn, &D2 3.6Online Command Mode Escape Codes, On3.8Modem-to-ModemConnection Data Rates Intel Confidential +PMH=0 +PCW=0+VCID=1 +++AT Intel Confidential hook to connect the call. Now you can answer the phone and talk. After completing your voice conversation, the modem will issue another +PMHF and ATO command to initiate a Quick Connect. If the server rejects the request to go on hold, the user can stay on line ATO command issued or disconnect from his initial data connection ATH command issued Table 16. Supported Modulation Types 3.9Diagnostic Testing S18, &Tn 3.9.1Local Analog Loopback AT&T1 3.9.2Local Analog Loopback With Self-TestAT&T8 LOCAL MODEMFigure 6. Local Analog Loopback Test Local Modem or Test Modem 3.10.1Time-IndependentEscape Sequence Licensing Requirements for Hayes Escape Sequence Format <char1><char2><char3><AT command><contents of S3>char1 = char2 = char3 = escape character S2 Table 18. Data Mode Command Descriptions 3.10.2Hayes* Escape Sequence Intel Confidential Sn=x Intel Confidential Data Mode AT COMMANDS536EX Chipset Developer’s Manual Data Mode AT COMMANDS AT&V0 Intel Confidential Indication Command DefaultDefinition 1, 0, Intel Confidential +ETBM +ESR1, 1, +GMR +GSN+IFC +ILRR=m Data Mode AT COMMANDS <carrier> Description+MS=m see ‘m’ +PHSW= +PMHF<value> +PMHR Intel Confidential Error Correction and Data Compression Error Correction and Data Compression4Table 19. Operating Modes Table 20. Resulting +ES Connection Types NOTES Intel Confidential Error Correction and Data Compression536EX Chipset Developer’s Manual Intel Confidential +DR=m direction+DS=m <max string> 3768 +EFCS=m +ER=m +ES=m Fax Class 1 AT Commands 5.1Fax Identity Commands5.2Fax Class 1 Commands Fax Class 1 AT Commands Table 23. <mod> Selection Table Figure 8. T.30 HDLC Frame Format Table 24. Fax Mode Command Descriptions Table 24. Fax Mode Command Descriptions Continued +FRH=mRefer to Table 23 on page shown in Table 23 on page +FTH=m IS-101Voice Mode AT Commands IS-101Voice Mode AT Commands 6.1DTMF Detection Reporting Table 25. Voice Mode Command Descriptions6.2Relay Control +FLO=m m = <deassert>, <assert> m=<enable>, <report> +VDR=m m = <mask> +VEM=m Intel Confidential +VIP Preassigned Voice I/O Labels +VLS=m Voice I/O Primitive Codes Relay/Playback Control: cont m = <sds>, <sdi> +VRX+VSD=m +VSM=m m= <cml>, <vsr>, <scs>, <sel>Transmission: Range: Compression Method Selection: cont +VSP=m factory default is ‘0’ +VTS=m none Command DefaultDescription DTMF and Tone Generation: cont Table 26. S-RegisterCommand Descriptions S-RegistersS-Registers S-Registers Intel Confidential536EX Chipset Developer’s Manual S-Registers Intel Confidential536EX Chipset Developer’s Manual S-Registers Intel Confidential536EX Chipset Developer’s Manual S-Registers Caller ID Caller IDTable 27. Caller ID Tags for Formatted Reporting RING DATE = TIME = NMBR = NAME = DOE JOHN MESG = RING RING<DLE> R NMBR = Parallel Host Interface 16C450/16C550A UARTParallel Host Interface 16C450/16C550A UART Figure 11. UART Emulation in Intelsdb.VxD UART Transmitter Flow Diagram UART Receiver Flow Diagram REGISTER BIT NUMBERADDRESS NAME 9.2.1Scratch Register SCR 9.2.2Modem Status Register MSRFigure 14. Scratch Register SCR Figure 15. Modem Status Register MSR 9.2.3Line Status Register LSR Figure 16. Line Status Register LSR 9.2.4Modem Control Register MCR 9.2.5Line Control Register LCRFigure 17. Modem Control Register MCR Figure 18. Line Control Register LCR Register 9.2.6FIFO Control Register FCRFigure 19. FIFO Control Register FCR Figure 20. Interrupt Identity Register IIR 9.2.7Interrupt Identity Register IIRTable 28. Interrupt Control Functions 9.2.8Interrupt Enable Register IER Figure 21. Interrupt Enable Register IER9.2.9Transmitter Holding Register THR Figure 22. Transmitter Holding Register THR 9.2.10Receiver Buffer Register RBR 9.2.11Divisor Latch Registers DLM and DLLFigure 23. Receiver Buffer Register RBR Figure 24. Divisor Latch Registers DLM and DLL 9.3.1FIFO Interrupt Mode Operation 9.316C550A UART FIFO Operation9.3.2FIFO Polled Mode Operation Parallel Host Interface 16C450/16C550A UART Intel Confidential536EX Chipset Developer’s Manual