INTEL 186 EB/EC EVALUATION BOARD USER’S MANUAL
| VCC | VCC | |
Jumper Wire | T1OUT | T0IN | |
T0OUT | T1IN | ||
| |||
| GND | GND | |
| P2.2 | INT0 | |
| P2.3 | INT1 | |
| BCLK0 | INT2 | |
10K ohm | P2.6 | INT3 | |
P2.7 | INT4 | ||
| |||
| GND | GND | |
| +5V | GCS6# | |
Jumper Wire | +12V | GCS7# | |
|
| ||
| 186 EB Connector JP2 | ||
JP2 |
|
| |
T0IN | T1OUT |
| |
T1IN | T0OUT |
| |
VCC | VCC |
| |
INT0 | P3.0 |
| |
INT1 | P3.1 |
| |
INT2 | P3.2 |
| |
INT3 | P3.3 |
| |
INT4 | P3.4 |
| |
INT5 | P3.5 |
| |
INT6 | WDTOUT# |
| |
INT7 | GND | Jumper Wire | |
INTA# | BCLK0 |
| |
GND | P2.3 |
| |
DRQ0 | RXD1 |
| |
DRQ1 | TXD1 |
| |
DRQ2 | P2.6 | 10K ohm | |
DRQ3 | CTS1# | ||
| |||
GND | GND |
| |
GCS6# | +5V |
| |
GCS7# | +12V |
| |
186 EB |
| Jumper Wire | |
| 186 EC Connector JP2 | ||
186 EC Connector JP2 |
| ||
|
| ||
Figure 3-2. Jumper Assembly for Flash Downloading
3.Reconnect the serial cable and
You should notice that the text CQFLASH LOADER now displays on the LED, signaling that the board is ready for Flash downloading.
When the jumper assembly is installed, the Flash target program waits for commands from the PC host, allowing you to use the provided Flash loader utility program to download programs to the Flash.
