Intel J2 650 system manual I/O Ports, I/O Panel, Off / On Button, Off / On button Location

I/O Ports

The 650 is an integrated design with all the electronics in the head. Most I/O ports are accessible in the cable well at the bottom of the unit. A cover plate is provided to cover the cables.

I/O Panel

Off / On Button

The Off /On button is located in the cable well, as shown. This button is located near the side to prevent accidental powering down by the user. The function of the button can be controlled by the OS. If the 650 hangs for some reason it can always be powered off by holding the Off / On button in for six seconds.

The 650 also supports the following: Restore on AC on power loss, Wake On LAN, and Wake On RTC alarm features to control the system power up. Please see the BIOS setup section of this manual and J2 white paper “Reducing Your Carbon Footprint in the POS Environment” (September 2008).

Off / On button Location

650 System Manual (Draft)	13
Version 0.4 August 20, 2008