Intel J2 650 Removing the Back Cover, Remove two screws as shown Carefully tilt up the back cover

Removing the Back Cover

The following steps show how to disassemble the 650 for servicing:

On a clean, protected surface, place the unit screen-side down. Remove the two cover screws as shown. Carefully lift the back cover as shown.

Remove two screws as shown

Carefully tilt up the back cover

Note: The 650 was designed so that the internals of the unit could be accessed without having to remove the mounting base or the mounting bracket of the unit.

650 System Manual (Draft)	28
Version 0.4 August 20, 2008