Intel J2 650 Ethernet Connection, Kensington Security Slot, Kensington slot Cable Well

Ethernet Connection

The 650 uses the Realtek 8111C Gigabit Ethernet controller. The Ethernet connector is located in the cable well, as shown below. The Ethernet controller supports Wake on LAN, the BIOS supports a PXE boot ROM as well. There are two LEDs on the LAN connector: the Green LED lights up when the LINK signal is present and the Amber LED lights comes on when there is LAN activity.

Kensington Security Slot

There are two Kensington Security Slots (lock slots) on the 650. (Please see below). One is located on the head in the cable well, and one is located on the inside of the base. The Kensington locks are normally used as a deterrent to prevent opportunistic theft. Most retail locks will work with the 650, however please check to see if a lock fits, as not all do.

Kensington slot Cable Well Kensington slot Base

650 System Manual (Draft)	20
Version 0.4 August 20, 2008