Intel J2 650 system manual You may now exit the control panel, the UPS configuration is complete

5:The default values for the Interface Configuration are what the J2 UPS uses so just click Finish.

6:When returned to the Power Options Properties window click Apply to save the configuration. It will take a number of second to configure. Once done the Details should show Manufacture: Generic and Model: Custom and the UPS and driver should be working. This can be quickly tested by removing the AC power to the unit. If everything is working the Current power source: should change to On Battery.

You may now exit the control panel, the UPS configuration is complete.

650 System Manual (Draft)	74
Version 0.4 August 20, 2008