CPU Installation Procedures for Socket 462
1.Please turn off the power and
unplug the power cord before |
|
installing the CPU. | Open Lever |
Sliding | 90 degree |
Plate |
|
2.Pull the lever sideways away from the socket. Make sure to raise the lever up to a
3.Look for the gold arrow. The gold arrow should point towards the lever pivot. The CPU can only fit in the correct orientation.
4.If the CPU is correctly installed, the pins should be completely embedded into the socket and can not be seen. Please note that any violation of the correct installation procedures may cause permanent damages to your mainboard.
5.Press the CPU down firmly into the socket and close the lever. As the CPU is likely to move while the lever is being closed, al- ways close the lever with your fingers pressing tightly on top of the CPU to make sure the CPU is properly and completely embed- ded into the socket.
Gold arrow
Gold arrow
Gold arrow
Press down
the CPU
Correct CPU placement
O
Incorrect CPU placement
X
Close
Lever
2 - 4
