Intel KM4AM, KM4M Floppy Disk Drive Connector FDD1, Fan Power Connectors CPUFA1/SYSFA1, 2-15

Hardware Setup

Connectors

The mainboard provides connectors to connect to FDD, IDE HDD, case, LAN, USB Ports and CPU/System FAN.

Floppy Disk Drive Connector: FDD1

The mainboard provides a standard floppy disk drive connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.

FDD1

Fan Power Connectors: CPUFA1/SYSFA1

The CPUFA1 (processor fan) and SYSFA1 (system fan) support system cooling fan with +12V. It supports three-pin head connector. When connecting the wire to the connectors, always take note that the red wire is the positive and should be con- nected to the +12V, the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset on-board, you must use a spe- cially designed fan with speed sensor to take advantage of the CPU fan control.

GND +12V SENSOR

SYSFA1

GND +12V SENSOR

CPUFA1

MSI Reminds You...

1.Always consult the vendors for proper CPU cooling fan.

2.CPUFA1 supports the fan control. You can install the PC Alert utility that will automatically control the CPU fan speed according to the actual CPU temperature.

2-15