Intel KM4AM AGP & P2P Bridge Control, AGP Aperture Size, AGP Mode, AGP Driving Control, 3-12

MS-6734 M-ATX Mainboard

AGP & P2P Bridge Control

Press <Enter> and the following sub-menu appears.

AGP Aperture Size

This setting controls just how much system RAM can be allocated to AGP for video purposes. The aperture is a portion of the PCI memory address range dedicated to graphics memory address space. Host cycles that hit the aperture range are for- warded to the AGP without any translation. The option allows the selection of an aperture size of 4MB, 8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB and 1G.

AGP Mode

The item sets an appropriate mode for the installed AGP card. Setting options: 1x, 2x, 4x. Select 4x only if your AGP card supports it.

AGP Driving Control

This field is used to adjust the AGP driving force. Selecting Manual allows you to select an AGP driving force in AGP Driving Value. It is strongly suggested to select Auto to avoid causing any system error.

AGP Driving Value

This item specifies an AGP driving force.

AGP Fast Write

This option enables or disables the AGP Fast Write feature. The Fast Write technol- ogy allows the CPU to write directly to the graphics card without passing anything through the system memory and improves the AGP 4X speed. Select Enabled only when your AGP card supports the feature. Options: Disabled, Enabled.

AGP 3.0 Calibration cycle

This setting disables/enables the AGP auto calibration. Setting options: Disabled, Enabled.

VGA Share Memory Size

The system shares memory to the onboard VGA card. This setting controls the exact memory size shared to the VGA card. Setting options: 16MB, 32MB, 64MB.

CPU Disconnect Control

The item is to reduce the power consumption of the AMD K7 system. When set to Enabled, the processor is allowed to disconnect the s2k interface when the AMD k7 system is in some power saving states. Options: Enabled, Disabled.

3-12