Hardware Setup
Power Supply
The mainboard supports ATX power supply for the power system. Before inserting the power supply connector, always make sure that all components are installed properly to ensure that no damage will be caused.
ATX 20-Pin Power Connector: CONN1
This connector allows you to connect to an ATX power supply. To connect to the ATX power supply, make sure the plug of the power supply is inserted in the proper orientation and the pins are aligned. Then push down the power supply firmly into the connector.
ATX 12V Power Connector: JPW1
This 12V power connector is used to provide power to the CPU.
11 | 1 |
20 | 10 |
CONN1 | |
CONN1 Pin Definition
PIN | SIGNAL | PIN | SIGNAL |
1 | 3.3V | 11 | 3.3V |
2 | 3.3V | 12 | |
3 | GND | 13 | GND |
4 | 5V | 14 | PS_ON |
5 | GND | 15 | GND |
6 | 5V | 16 | GND |
7 | GND | 17 | GND |
8 | PW_OK | 18 | |
9 | 5V_SB | 19 | 5V |
10 | 12V | 20 | 5V |
|
|
|
|
2 | 1 | JPW1 Pin Definition | ||
PIN | SIGNAL | |||
|
| |||
4 | 3 | 1 | GND | |
|
| 2 | GND | |
JPW1 |
| 3 | 12V | |
| 4 | 12V | ||
2 - 9
