Intel PPC-7508F M1 user manual VGA Driver Utility, Installation of VGA Driver

Chapter 3 Software Configuration

3-2. VGA DRIVER UTILITY

The VGA interface embedded with our PPC-7508F can support a wide range of display. You can display CRT, LVDS simultaneously with the same mode.

3-3-1. Installation of VGA Driver:

To install the VGA Driver, simply follow the following steps:

(1). Place insert the Utility Disk into Floppy Disk Drive A/B or CD ROM drive.

(2). Under Windows 98SE/NT4.0/2000/XP system, go to the directory where VGA driver is located.

(3). Click Setup.exe file for VGA driver installation.

(4). Follow the instructions on the screen to complete the installation.

(5). Once installation is completed, shut down the system and restart in order for the changes to take effect.

Under the Windows 98 system, after rebut computer, there will have two error messages appear, “Can’t find ikch8xx.cat and isb8xx.cat, just skip the messages, they will not cause any effects.

PPC-7508F USER′S MANUAL Page:3-3