Chapter 2 Hardware Configuration

2-13. RESET / NMI SELECTION

JP4 : Reset/NMI/Clear Watchdog Selection The selections are as follows:

FUNCTION

JUMPER SETTING

Reset

3-4

(default)

 

NMI

5-6

JUMPER

ILLUSTRATION

User may select to use the Reset or NMI watchdog. NMI, also known as Non-Maskable Interrupt, is used for serious conditions that demand the processor’s immediate attention, it cannot be ignored by the system unless it is shut off specifically. To clear NMI command, user should short the “Clear Watchdog” pin via push button.

Page: 2-16

PPC-7508F USERS MANUAL

Page 30
Image 30
Intel PPC-7508F M1 user manual Reset / NMI Selection, Nmi