Intel PPC-7508F M1 user manual Onboard Device

Chapter 4 Award BIOS Setup

select Auto to enable BIOS support.

4.IDE HDD Block Mode:

Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read/writes per sector the drive can support.

ONBOARD DEVICE:

The options for these items are found in its sub menu. By pressing the <ENTER> key, you are prompt to enter the sub menu of the detailed options as shown below:

Phoenix – Award CMOS Setup Utility

Onboard Device

USB Controller	[Enabled]	Item Help
USB 2.0 Controller	[Enabled]
USB Keyboard Support	[Disabled]
USB Mouse Support	[Disabled]	Menu Level ►
AC97 Audio	[Auto]
Init Display First	[Onboard/AGP]
↑↓→←:Move Enter: Select	+/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values	F6:Fail-Safe Defaults F7:Optimized Defaults

Descriptions on each item above are as follows:

1.USB Controller

This should be enabled if your system has a USB installed on the system board and you want to use it. Even when so equipped, if you add a higher performance controller, you will need to disable this feature.

2.USB Keyboard Support

Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a USB keyboard.

3.USB Mouse Support

Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a USB Mouse.

4.AC97 Audio:

This item allows you to enable/disable to support AC97 Audio.

5.Init Display First

Select the initial Display type

PPC-7508F USER′S MANUAL Page: 4-15