Intel® Server Board S5000PAL / S5000XAL TPS

Jumper Block Settings

6.Jumper Block Settings

The server board has several 2-pin and 3-pin jumper blocks that can be used to configure, protect, or recover specific features of the server board. Pin 1 on each jumper block is denoted by an “*” or “▼”.

6.1Recovery Jumper Blocks

 

 

Table 33. Recovery Jumpers (J1D1, J1D2, J1D3)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Jumper Name

Pins

 

 

What happens at system reset…

J1D1: BMC Force

1-2

BMC Firmware Force Update Mode – Disabled (Default)

Update

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2-3

BMC Firmware Force Update Mode – Enabled

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

J1D2: Password

1-2

These pins should have a jumper in place for normal system operation. (Default)

Clear

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2-3

If these pins are jumpered, administrator and user passwords will be cleared

 

 

 

immediately. These pins should not be jumpered for normal operation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

J1D3: CMOS

1-2

These pins should have a jumper in place for normal system operation. (Default)

Clear

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2-3

If these pins are jumpered, the CMOS settings will be cleared immediately. These pins

 

 

 

should not be jumpered for normal operation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BMC Force

Update Mode

2

3

J1D2

 

Disable

Password

2

Enable

Reset

3

 

 

J1D1

2

3

J1D3

Clear

CMOS

TP02080

Figure 17. Recovery Jumper Blocks (J1D1, J1D2, J1D3)

Revision 1.4

61

 

Intel order number: D31979-007

Page 60
Image 60
Intel S5000XAL Recovery Jumper Blocks, Recovery Jumpers J1D1, J1D2, J1D3, Jumper Name Pins What happens at system reset…