Intel S5000XAL manual Serial Port Connectors, Keyboard and Mouse Connector

Connector / Header Locations and Pin-outs Intel® Server Board S5000PAL / S5000XAL TPS

5.7.6Serial Port Connectors

The server board provides one external RJ45 Serial ‘B’ port (J9A2) and one internal 9-pin Serial ‘A’ port header (J1B1). The following tables define the pin-outs for each.

Table 27. External RJ-45 Serial ‘B’ Port Pin-out (J9A2)

Pin	Signal Name	Description
1	SPB_RTS	RTS (request to send)
2	SPB_DTR	DTR (Data terminal ready)
3	SPB_OUT_N	TXD (Transmit data)
4	GND	Ground
5	SPB_RI	RI (Ring Indicate)
6	SPB_SIN_N	RXD (receive data)
7	SPB_DSR _DCD	Data Set Ready / Data Carrier Detect 1
8	SPB_CTS	CTS (clear to send)

Note:

1A jumper block on the server board will determine whether DSR or DCD is routed to pin 7. The board will have the jumper block configured with DSR enabled at production.

Table 28. Internal 9-pin Serial ‘A’ Header Pin-out (J1B1)

Pin	Signal Name	Description
1	SPA_DCD	DCD (carrier detect)
2	SPA_DSR	DSR (data set ready)
3	SPA_SIN_L	RXD (receive data)
4	SPA_RTS	RTS (request to send)
5	SPA_SOUT_N	TXD (Transmit data)
6	SPA_CTS	CTS (clear to send)
7	SPA_DTR	DTR (Data terminal ready)
8	SPA_RI	RI (Ring Indicate)
9	GND	Ground

5.7.7Keyboard and Mouse Connector

Two stacked PS/2 ports (J9A1) are provided to support both a keyboard and a mouse. Either PS/2 port can support a mouse or keyboard. The following table details the pin-out of the PS/2 connector.

Table 29. Stacked PS/2 Keyboard and Mouse Port Pin-out (J9A1)

Pin	Signal Name	Description
1	KB_DATA_F	Keyboard Data
2	TP_PS2_2	Test point – keyboard
3	GND	Ground
4	P5V_KB_F	Keyboard / mouse power
5	KB_CLK_F	Keyboard Clock
6	TP_PS2_6	Test point – keyboard / mouse
7	MS_DAT_F	Mouse Data
8	TP_PS2_8	Test point – keyboard / mouse
9	GND	Ground

58Revision 1.4

Intel order number: D31979-007