Intel S5000XAL manual ƒ Default Hysteresis, ƒ Criticality, ƒ Standby

Appendix B: Sensor Tables Intel® Server Board S5000PAL / S5000XAL TPS

ƒRearm Sensors

-The rearm is a request for the event status for a sensor to be rechecked and updated upon a transition between good and bad states. Rearming the sensors can be done manually or automatically. This column indicates the type supported by the sensor. The following abbreviations are used in the comment column to describe a sensor:

A:Auto-rearm

M:Manual rearm

ƒDefault Hysteresis

-Hysteresis setting applies to all thresholds of the sensor. This column provides the count of hysteresis for the sensor, which can be 1 or 2 (positive or negative Hysteresis).

ƒCriticality

-Criticality is a classification of the severity and nature of the condition. It also controls the behavior of the Control Panel Status LED.

ƒStandby

-Some sensors operate on standby power. These sensors may be accessed and / or generate events when the main (system) power is off, but AC power is present.

86Revision 1.4

Intel order number: D31979-007