2Setting Up the Chassis

3.Remove the drive from its protective wrapper and place it on an antistatic surface.

4.Record the drive model and serial numbers in your equipment log.

5.Set any jumpers or switches on the drive according to the drive manufacturer’s instructions.

6.Using four screws of the appropriate size and length, attach two slide rails to the drive. Note that the left and right rails mirror each other. The rails must be installed with the metal flange with the screw holes to the front of the drive and the flap with the screw holes must point away from the drive.

B

TP00081

Figure 9. Slide Rails

Intel® Entry Server Chassis SC5275-E User Guide

17

Page 35
Image 35
Intel C50277-001, SC5275-E manual Slide Rails