WIRELESS NETWORK IP CAMERA User’s Guide

Using IP Installer

To install an IP address, you should use the IP Installer provided with Wireless Network IP Camera. You can also download the latest version of this program from the web site (http://intellinet- network.com).

Note : System requirements for IP Installer: Microsoft Windows9x/NT/2000/XP.

Execute the IP Installer after the Network

IP Camera has completed the boot process (wait at least 15 seconds).

When the IP Installer is executed, the panel

shows every Wireless Network IP Camera connected on the local network.

From the Wireless Network IP Cameras

listed, select one to assign a new IP address (every Wireless Network IP Camera has a factory default IP address).

Note: The MAC Address can be found on the underside label of the Wireless Network IP Camera. To choose a Wireless Network IP Camera, click on its list.

Enter the Administrator ID and password in the blank (Default Administrator ID and password are all “admin”) to assign (or change) the IP Address for the Wireless Network IP Camera..

Enter the IP address, Gateway address, Subnet Mask address, and DNS Server address that are assigned from network administrator. (When the addresses are not assigned properly, you cannot access the Wireless Network IP Camera).

The Server IP Address represents an IP address of a PC that runs a TFTP Server which is being used to upgrade the firmware of the Wireless Network IP Camera via Hyperterminal. This upgrade method is designed for engineers. Therefore, the Server IP Address field can normally be left blank.

15