WIRELESS NETWORK IP CAMERA User’s Guide

Install New Firmware

The Wireless Network IP Camera can be upgraded via the LAN or remotely over the Internet. Follow these steps to install new firmware:

Confirm that the Wireless Network IP Camera is connected to your PC. (As long as you can access your Wireless Network IP Camera Home page, you can upgrade its firmware.)

Execute the upgrade utility (included in ZIP file).

Enter the camera’s IP address, upgrade

port number, Admin ID and password configured on the Network Configuration page.

And then press “start upgrade” button.

You may see the upgrading status.

Upgrading levels are divided into 4 steps from “Transferring Firmware” to “Verify flash memory”. (Each step is indicated on progress bar.)

When upgrading is complete, a message appears. "Firmware Upgrade Completed."

Click the “OK” button.

The Upgrade process must not be interrupted!If the network connection fails during the upgrade, the camera will be damaged.

62