Intellinet Network Solutions 550703 Assigning IP Address, WIRELESS NETWORK IP CAMERA User’s Guide, Follow these steps to assign an IP address using Hyper Terminal

WIRELESS NETWORK IP CAMERA User’s Guide

Assigning IP AddressFollow these steps to assign an IP address using Hyper Terminal

1.Execute “Hyper Terminal” on your PC

2.Connect an RS232 Cable to the serial port of the PC that you have selected in Chapter 4.3.1 - Configuring Hyper Terminal and the Wireless Network IP Camera serial port while Hyper Terminal is executed.

3.Supply power to the Wireless Network IP Camera.

4.A count down will start with the message “Press any key to stop auto-boot.”

5.Press any key. “Boot” prompt should appear as below.

19