RECLINER | PROCEDURE 8 |
|
|
REMOVING/INSTALLING THE REAR WHEELS (FIGURE 5)
WARNING
TRACER SX RECLINER ONLY: Mount the rear wheels in the Rear Wheel Offset Bracket ONLY. NEVER reposition the rear wheels to the forward position, stability of the wheelchair will de- crease, and injury or damage may result.
NOTE: If changing rear wheel size refer to CHANGING SEAT TO FLOOR HEIGHT in PROCEDURE 8 of this manual BEFORE performing this procedure.
Removing
1.Note mounting position of EXISTING rear wheel.
2.Remove the axle mounting screw and locknut that secure the EXISTING rear wheel and spacer to the wheel offset bracket.
3.Remove the EXISTING rear wheel from wheel offset bracket.
Installing
1.Secure the new/existing rear wheel and spacer to wheel offset bracket with axle mounting screw and locknut. Securely tighten.
Rearward |
|
Mounting | Forward Mounting |
Positions |
XPositions
(DO NOT USE)
X
Rear Wheel Offset
Bracket
Rear Wheel
Locknut 
Spacer
Rear Wheel
Offset Bracket
R E C L I N E R
Axle Mounting Screw
FIGURE 5 - REMOVING/INSTALLING THE
REAR WHEELS
33
