Invacare SX Recliner Installing The Telescoping I.V. Rod, Adjustment, I.V. Rod On The, Knob, Step

PROCEDURE 9 OPTIONS

O P T I O N S

INSTALLING THE TELESCOPING I.V. ROD

NOTE: Flip-back style arms will not flip back when used on the same side of the wheelchair as the telescoping I.V. rod.

Installing Ther telescoping I.V. Rod on Non- Transport Wheelchairs Only (FIGURE 1)

1.Determine if the telescoping I.V. rod will be mounted on the right or left side of the wheelchair.

NOTE: The telescoping I.V. rod is factory set for installa- tion onto either the right side of a wheelchair with back uphol- stery mounted to the front of the back canes OR the left side of a wheelchair with back upholstery mounted to the back of the back canes. Refer to REPOSITIONING THE UP- PER ATTACHMENT in this instruction sheet if any other mounting position is desired.

2.Position the I.V. rod mounting bracket on the step tube on the side determined in STEP 1.

3.Loosely install the lug screw, spacer and locknut that secure the mounting bracket to the back cane.

4.Remove the top phillips screw and washer from the back upholstery.

Adjustment	MOUNTING THE
	I.V. ROD ON THE
Knob		RIGHT SIDE
Upper		I.V.
Attachment		Rod Back Cane
I.V. Rod		Back
Support Tube
		Upholstery
I.V. Rod
Mounting Bracket		Washer
(STEP 2)
Lug Screw		Phillips
(STEP 3)		Screw
Spacer
(STEP 3)	Locknut
	(STEP 3)	Step Tube
Back Upholstery		MOUNTING THE
	Back	I.V. ROD ON THE
	Cane	LEFT SIDE

5.Line up the mounting holes in the back cane, back upholstery and upper attachment.

6.Reinstall the washer and phillips screw and securely tighten.

7.Securely tighten all attaching hardware.

8.Loosen the adjustment knob and position the I.V. rod to the desired height and securely tighten the adjustment knob.

Upper Attachment

Phillips Screw

Washer

FIGURE 1 - INSTALLING THE TELESCOPING I.V. ROD

ON NON-TRANSPORT WHEELCHAIRS ONLY

1

36