SECTION 4—FOOTREST

Adjusting Footplate Angle

1.Loosen, but DO NOT remove the two mounting screws and locknuts (not shown) that secure the footplate to the two footrest tubes.

2.Position the footplate to the necessary angle to accommodate the user.

3.Retighten the two mounting screws and locknuts.

NOTE: The locknuts should lie in the channel of the footplate clamp.

Adjusting Footplate Depth

1.Remove the two mounting screws and locknuts (not shown) that secure footplate to the footrest tubes.

NOTE: Observe the angle of footplate for reinstallation.

2.Move the footplate to one of two mounting positions to accommodate the user.

3.Using the two mounting screws and locknuts, secure the footplate to the footrest tubes.

NOTE: The locknuts should lie in the channel of the footplate half clamp.

 

Mounting

Clamp

Wheelchair

Positions

(Allen

Frame

 

Screw)

Clamp

 

 

(Allen Screw)

 

 

 

 

Mounting

 

 

Screws

 

Footrest

Locknut

 

Tube

(Not Shown)

 

 

Footplate

Adjustments Depth

Angle

Height

FIGURE 4.3 Replacing/Adjusting Optional Adjustable Angle Footrest

Part No 1148078

27

Crossfire™Series Wheelchairs

Page 27
Image 27
Invacare T6 manual Adjusting Footplate Angle, Adjusting Footplate Depth