SECTION
4.Align the desires mounting positions of the camber tube mounting brackets with the opening of the camber tube supports.
5.Install the four socket screws, washers, and lock washers into the desired mounting positions of both camber tube mounting brackets. Hand tighten.
6.Slide the camber bar forward or backward to adjust the wheelbase length to the desired position. Securely tighten the four socket screws.
7.Install the rear wheels. Refer to Removing/Installing Rear Wheels on page 38.
Camber Tube
Support
Washers
Socket Screws 
Camber Tube
Mounting Bracket Camber
Tube
FIGURE 8.8 Repositioning the Camber Tube Mounting Bracket Socket Screws
Reversing the Camber Tube Mounting Bracket Direction
NOTE: For this procedure, refer to FIGURE 8.9 on page 46.
1.Remove the rear wheels
2.Remove the four socket screws, washers, and locking washers that secure the two camber tube mounting bracket to the camber tube supports.
3.Rotate the camber tube so that the camber tube mounting bracket faces the opposite direction.
4.Align the desires mounting positions of the camber tube mounting brackets with the opening of the camber tube supports.
5.Install the four socket screws, washers, and lock washers into the desired mounting positions of both camber tube mounting brackets. Hand tighten.
6.Slide the camber bar forward or backward to adjust the wheelbase length to the desired position. Securely tighten the four socket screws.
Part No 1148078 | 45 | Crossfire™Series Wheelchairs |
