SECTION
Removing Foldover Back Upholstery
1.Unfasten the two fastening flaps that secure the bottom of the existing back upholstery to the back canes.
2.Unfold the top of the back upholstery.
3.Lift up on the existing back upholstery and remove from the wheelchair.
Installing Foldover Back Upholstery
1.Install the new back upholstery onto the back canes.
2.Wrap the end of a fastening flap around the back cane.
3.Insert the end of the fastening flap through the loop.
4.Wrap the fastening flap around the back cane again and press firmly to secure.
5.Fold the top of the back upholstery down over the back canes towards the front of the wheelchair.
6.Press firmly to secure the fastening strips.
Back Upholstery
Fastening Strips
Fastening Flap
Loops
Front of Wheelchair
Fold
Fastening Flap
Back Canes
FIGURE 6.4 Removing/Installing Foldover Back Upholstery
Crossfire™Series Wheelchairs | 34 | Part No 1148078 |
