Invacare T6 manual Adjusting Swingaway Padded Armrest Height

SECTION 5—ARMS

Adjusting Swingaway Padded Armrest Height

NOTE: For this procedure, refer to FIGURE 5.2.

1.Remove the half arm from the arm socket.

2.Remove the mounting bolt, two washers and locknut mounted in the arm socket that determine the swingaway padded armrest height.

3.Reposition mounting bolt and one washer to one of three positions in the arm socket depending on the desired height.

4.Retighten the mounting bolt and washer to the arm socket with the remaining washer and locknut.

5.Reinstall the half arm into the arm socket.

6.Repeat STEPS 1-5 for the opposite side, if necessary.

Swingaway Padded Armrest

Arm Socket

Washer

Locknut Washer

Mounting Bolt Three Mounting Positions

FIGURE 5.2 Adjusting Swingaway Padded Armrest Height

Part No 1148078 29 Crossfire™Series Wheelchairs