SECTION
Removing/Installing/Repositioning the Caster Assemblies
NOTE: If replacing a front caster note the mounting position of the existing front caster for installation of the new front caster.
NOTE: Both front casters MUST be the same size and adjusted to the same height.
Standard Forks
NOTE: For this procedure, refer to FIGURE 8.15.
Removing Front Caster
1.Remove the mounting bolt, axle spacers and locknut that secure the front caster to the fork.
2.Remove the caster from the fork.
Installing Front Caster
1.Using the mounting bolt, axle spacers and locknut, secure the caster to the desired caster mounting position.
Fork
Mounting Bolt
Locknut
Caster 
Axle | Axle |
Spacer | Spacer |
FIGURE 8.15 Removing/Installing/Repositi oning the Caster Assemblies - Standard Forks
Suspension Forks
NOTE: For this procedure, refer to FIGURE 8.16 on page 52.
Removing the Caster
NOTE: One mounting screw will not turn.
1.Using two allen wrenches, turn mounting screws in opposite directions and remove one mounting screw from fork.
2.Remove the threaded bushing with mounting screw and two spacers securing the caster to the fork. DO NOT use excessive force.
3.Remove the caster from the fork.
Part No 1148078 | 51 | Crossfire™Series Wheelchairs |
