Assembly
FIGURE 5
Step 1:
Pull the Pulse Wires (25a) out through the top of the of the Console Tube (2). Connect the Pulse Wires (25a) and Extension Wire (7) to the wires coming from the Console. Using Four M5x10mm Screws (8) attach the Console (55) to the Console Tube (2) Note: The four Screws will already be installed into the back of Console (55) when you remove it from the box.
FIGURE 6:
Step 1:
Slide Left Handlebar (3) onto the Stud. Connect Left Handlebar (3) with one M10x19x2.0mm Washer (69), M10x30 Black Washer (61), Shaft Cap (12), M10 Locknut (52), Acorn Cap Nuts (13), and M10 Curved Washer (87).
Step 2:
Repeat for right side.
Figure 5
Figure 6
