Assembly
INSTRUCTIONS FOR ASSEMBLY:
Unpack the box in a clear area. Check to make sure all components are present and in good condition. Do not dispose of the packing material until the assembly is completed. Tools have been provided for you to use when assembling this product.
Locate the hardware pack and identify the following parts required for assembly.
Tools:
1.Allen Wrench, M6 and M8
2.Phillips Screw Driver
3.Wrench
Main Components:
1.Owner’s Manual
2.Main Frame
3.Handlebar w/Pulse Assembly
4.Upper Handlebar Assembly, Left and Right
5.Handlebar Post
6.Tension Knob
7.Sleeve Assembly Left and Right
8.Pedal Tube Assembly Left and Right
9.Console Assembly
10.Pedals Left and Right
11.Plastic Bellows
Hardware:
1.M5 x 10mm Screw (8) – Qty 4
2.Acorn Nut Cap (13) – Qty 2
3.M6 x 35mm Phillips Screw (28) – Qty 4
4.6mm Black Locknut (33) – Qty 4
5.M8 x 90mm Hex Head Screw (46) – Qty 2
6.8mm Locknut (thick) (49) – Qty 6
7.M8 x 19mm Washer (50) – Qty 8
8.M10 Locknut (thin) (52) – Qty 6
9.M8 x 15mm Hex Head Screw (63) – Qty 8
10.M10 x 57mm Screw (67) – Qty 2
11.M15.8 x 10 x 4.3T Spacer (68) – Qty 2
12.M10 x 23mm Washer (Silver) (69) – Qty 6
13.M8 x 18mm Curved Washer (72) Qty 6
14.M8 x 100mm Hex Head Screw (80) – Qty 4
15.M6 x 16mm Black Washer (85) – Qty 6
16.M6 x 45mm Screw (86) – Qty 6
