Assembly
FIGURE 1
Step 1:
Using Two Carriage Bolts (46), Cap Nuts (49), Hex Head Screws (63) and Four Washers (50), attach the Left and Right Extrusions to Main Frame.
Step 2:
Attach Aluminum Extrusion Plate (15) to the Left and Right Extrusions using Four M8x95mm Hex Head Screws (80), M8x19mm Washers (50), and 8mm Locknuts (49).
Figure 1
FIGURE 2
Step 1:
Using Three M6x45mm Screws
(86)and M6x16mm Washers (85) attach Left Foot Pedal (16) to the Left Pedal Tube Assembly (31).
Repeat for right side.
Figure 2 |
