Troubleshooting
If the S DVR 52 appears to be faulty, first consult this troubleshooting guide before calling for service. Refer also to the corresponding instructions in this manual.
WARNING
Under no circumstances should you attempt to repair the system yourself.
Symptom | Possible cause | Correction | |
|
|
|
|
No picture. | • The TV is switched OFF. | • | Turn ON the TV. |
| • The TV is not connected correctly. | • | Connect the TV correctly. |
|
|
| |
Disc can’t be played. | • The disc is placed upside down. | • Ensure the disc label is facing up. | |
| • The disc is empty or the format is | • Remove the disc and try another. | |
| not supported by S DVR 52. | • Clean the disc or dispose of it. | |
| • The disc is dirty or defect. | • Place the disk within the proper guide | |
| • The disc is not placed within the disc |
| on the disc tray. |
| tray guide. |
|
|
|
|
| |
No sound. | • The VOLUME is set to 0. | • Turn up the VOLUME. | |
| • Speaker cords are not connected | • | Connect them correctly. |
| correctly. |
|
|
|
|
|
|
The S DVR 52 unit does not | • No batteries are inserted in the | • | Insert new batteries. |
respond to commands from the | remote control. | • Replace with new batteries. | |
remote control. | • The batteries are worn out. | • Point the remote controller at the | |
| • The remote controller is not pointed |
| remote sensor of the S DVR 52. |
| at the remote sensor of the S DVR 52. | • Operate the remote controller | |
| • The remote controller is too far from |
| within 5 m. |
| the S DVR 52. |
|
|
|
|
| |
Power is not supplied even though | • The power plug is not securely | • Connect the power plug securely. | |
the power cable is connected. | connected. | • Turn ON the wall plug. | |
| • The wall plug is not turned ON. |
|
|
|
|
| |
The S DVR 52 does not respond to | • Operations may not be permitted by | • Read the instructions on the disc. | |
some operating commands during | the disc. |
|
|
playback |
|
|
|
|
|
|
|
20
