| Winding the Bobbin |
q | Removing the bobbin |
| Slide the hook cover plate release button to the right, |
| and remove the hook cover plate. Lift out the bobbin |
| from the bobbin holder. |
q Hook cover plate release button w Hook cover plate
e Bobbin
w
e
q
Setting the spool of thread
| Place the spool of thread on the spool pin with the |
| thread coming off the spool as shown. Attach the large |
| spool holder, and press it firmly against the spool of |
| thread. |
| NOTE: |
| Use the small spool holder to hold narrow or small |
w | spools of thread. |
| q Large spool holder |
| w Small spool holder |
Additional spool pin
Use the additional spool pin when you need to wind the bobbin without unthreading the machine while working on a sewing project.
r
| Insert the additional spool pin into the spool stand then | |
q | into the hole besides the horizontal spool pin. | |
Place the felt on the spool pin and place a spool of | ||
| ||
w | thread on it as shown. | |
| ||
| q Additional spool pin | |
e | w Spool stand | |
| e Hole | |
| r Felt |
6
