Janome 350E manual Embroidery Hoop a, Embroidery Hoop B

(A)

e

Embroidery Hoops

(A) Embroidery Hoop A:

q

w

r

(B)e

q

w

r

r

w
	y
e	t
	q

y

q

This is the standard size hoop, with a 12.6 cm (5”) by 11 cm (4 3/8”) embroidery area for sewing PC Card embroidery designs etc.

(B) Embroidery Hoop B:

This is the large-size hoop, with a 20 cm (8”) by 14 cm (5 1/2”) embroidery area for sewing large-size designs and combined designs.

qOuter hoop w Inner hoop e Attaching knob

r Hoop tightening screw

Templates

When positioning the fabric into the hoop, use the template to align the centerlines on the fabric with the center of the hoop. First mark the centerlines on the fabric and place the fabric on the outer hoop. Place the inner hoop and template over the fabric and adjust the fabric placement.

qStarting point for built-in and PC Card designs w Starting point for monogramming in horizontal

placement

e Starting point for Memory Card No. 102 and up for Memory Craft 5700/9000.

r Starting point for monogramming in vertical placement

t Embroidery boundary for built-in and PC Card designs.

NOTE:

The four indentations on the template do not correspond with reference lines.

yIndentations for positioning the template

15