Guide the thread around the bobbin winder thread | Janome 350E

Winding the bobbin

q

w

	z	z Guide the thread around the bobbin winder thread
	z	guide while holding the thread at the spool.
		guide while holding the thread at the spool.
		q Bobbin winder thread guide

q

	x Thread through the hole in the bobbin from the
x	inside to the outside. Put the bobbin on the bobbin
	winder spindle.
	w Bobbin winder spindle

w

c

v e

cPush the spindle to the right. Press the Start/Stop button while holding the end of the thread. Stop the machine after the bobbin has made a few turns. Cut the thread close to the hole in the bobbin.

vPress the Start/Stop button again. When the bobbin is fully wound it will stop automatically. Press the Start/Stop button to stop the machine then return the bobbin winder spindle to the left. Remove the bobbin and cut the thread with the bobbin thread cutter.

eBobbin thread cutter

NOTES:

Do not move the bobbin winder spindle while the machine is running.

For safety purposes, the motor will stop automatically after running for two minutes.

7

Image 9

Janome 350E manual Guide the thread around the bobbin winder thread

Contents

Instruction Book Important Safety Instructions 25-27 Names of Parts Know Your Machine Standard Accessories Detachable Extension Table Operating Instructions For Your Safety Winding the Bobbin Setting the spool of threadRemoving the bobbin Additional spool pin Guide the thread around the bobbin winder thread Inserting the bobbin Threading the Machine Raising the Presser Foot Slip the thread through the slit and down into Needle Threader Drawing up the Bobbin Thread When the needle thread tension is too tight Adjusting the Thread TensionWhen the needle tension is too loose Balanced thread tension Changing Needle Embroidery Hoop B Embroidery Hoop a Adhesive Iron-on Stabilizer Types of stabilizerUsage Setting the Fabric in an Embroidery Hoop Attaching the Embroidery Hoop to the Machine Pattern Selection Window Mode Setting Machine Settings Embroidery maximum speed Key position adjustmentSewing light Auto thread cutter 2Thread selection 4Reset all to default3Formatting the built-in memory 5Register key On-screen Help Language Selection Selecting Built-in Designs Color section key Ready to Sew screenNext/Previous section keys Color list key 0Carriage store key Trace keyScreen Information 5Stitch Back/Forward keys Sewing results Starting to Sew Embroidery Selecting the fonts Monogram Selection WindowLetter case European letters Mode key Refer to Number/Symbol keyDelete key Cursor keys Multi-color monogramming Example Bear in Gothic style Orientation of monogramming Bear Letters Monogram Correcting the Monogram Deleting a letterInserting a letter Inserting and ejecting a PC card PC Cards optional itemEjecting the PC card Selecting the PC card designs Opening the designs on USB memory USB Memory optional item Editing Screen 140x200mm Moving the selected pattern Editing the Embroidery Designs Changing the hoop size AF 126x110mm Resizing the selected pattern Flipping the patternRotating the selected pattern Magnifying the pattern image Deleting the pattern Saving a File Assigning the file name Creating a new folder Deleting the file Creating AN Original Design Apple Assemble the hook race Cleaning the Hook Race To replace To remove Reference ProblemCause