z
q
x
c
r
v
Inserting the bobbin
zPlace the Bobbin in the Bobbin Holder with the thread running off in the counterclockwise direction.
q Thread
wBobbin holder
w
xGuide the thread into front notch on the front of the bobbin holder.
Draw the thread to the left, sliding it between the tension spring blades.
eFront notch
e
cContinue to draw the thread lightly until the
thread slips into side notch.
Pull out about 10 cm (4") of thread to the rear.
rSide notch
y
vRefer to the threading chart shown on the hook
cover plate.
Reattach the hook cover plate.
tHook cover plate y Threading chart
t
8
