Trace key, 0Carriage store key, Screen Information | Janome 350E

!1	!2
Ready to Sew
	!3
	A Z
	!4
Mode	Jog
Mode	ST
	i !0

Trace outline

Cancelo

Paused
			A Z
‒	+	Mode	Jog
‒	+	Mode	ST
	!5		!6

iTrace key

You can check the size of the sewing area by pressing this key. The carriage traces the outline of the selected embroidery pattern without stitching.

The carriage will return to the starting position after tracing and the screen will return to the previous display.

To cancel the outline tracing, press the cancel key.

oCancel key

!0Carriage store key

Press the Carriage store key to bring the carriage back to its stored position after finishing embroidery.

Screen Information

Besides the design image, approximate sewing time in minutes, number of colors, design size and the hoop that should be used for the selected design are shown.

!1Sewing time in minutes !2Number of colors !3Design size !4Hoop

!5Stitch Back/Forward keys

When embroidery sewing has started, the screen will indicate the current stitch counts. The Jog keys will disappear and the Stitch back/forward keys will be indicated on the screen. You can use these keys to move the embroidery hoop to where the thread has broken or run out.

Press the Minus key to move the hoop back to a previous sewing point. The hoop will move backward every 10 stitches when you press this key.

Press the Plus key to move the hoop ahead. The hoop will move forward every 10 stitches when you press this key.

!6Jog/ST key

Press this key to switch the Jog keys to the Stitch back/forward keys before sewing.

NOTE:

Before you turn the power switch OFF, always be sure to return the carriage to its stored position.

27

Image 29

Janome 350E manual Trace key, 0Carriage store key, Screen Information, 5Stitch Back/Forward keys, 6Jog/ST key

Contents

Instruction Book Important Safety Instructions 25-27 Names of Parts Know Your Machine Standard Accessories Detachable Extension Table Operating Instructions For Your Safety Winding the Bobbin Setting the spool of threadRemoving the bobbin Additional spool pin Guide the thread around the bobbin winder thread Inserting the bobbin Threading the Machine Raising the Presser Foot Slip the thread through the slit and down into Needle Threader Drawing up the Bobbin Thread When the needle thread tension is too tight Adjusting the Thread TensionWhen the needle tension is too loose Balanced thread tension Changing Needle Embroidery Hoop B Embroidery Hoop a Usage Adhesive Iron-on StabilizerTypes of stabilizer Setting the Fabric in an Embroidery Hoop Attaching the Embroidery Hoop to the Machine Pattern Selection Window Mode Setting Machine Settings Embroidery maximum speed Key position adjustmentSewing light Auto thread cutter 2Thread selection 4Reset all to default3Formatting the built-in memory 5Register key On-screen Help Language Selection Selecting Built-in Designs Color section key Ready to Sew screenNext/Previous section keys Color list key 0Carriage store key Trace keyScreen Information 5Stitch Back/Forward keys Sewing results Starting to Sew Embroidery Selecting the fonts Monogram Selection WindowLetter case European letters Mode key Refer to Number/Symbol keyDelete key Cursor keys Multi-color monogramming Example Bear in Gothic style Orientation of monogramming Bear Letters Monogram Inserting a letter Correcting the MonogramDeleting a letter Inserting and ejecting a PC card PC Cards optional itemEjecting the PC card Selecting the PC card designs Opening the designs on USB memory USB Memory optional item Editing Screen 140x200mm Moving the selected pattern Editing the Embroidery Designs Changing the hoop size AF 126x110mm Rotating the selected pattern Resizing the selected patternFlipping the pattern Magnifying the pattern image Deleting the pattern Saving a File Assigning the file name Creating a new folder Deleting the file Creating AN Original Design Apple Assemble the hook race Cleaning the Hook Race To replace To remove Reference ProblemCause