GE 24941, Jasco RM24941 Additional Features

Additional Features

Keypress Beep Feature

Your RM24941 beeps whenever a key is pressed to acknowledge the keypress. You can turn

this feature on or off. The default setting is On.

To turn the Keypress Beep on or off, follow these steps:

1. Press and hold the SETUPkey on the rubber keypad until the LED indicator light

remains on and the touchscreen shows the Main Setup Screen. This process takes

approximately 2-3 seconds.

2. Release the SETUPkey.

3. Press and hold the MUTEkey on the rubber keypad for approximately 5 seconds until

the LED blinks and the Main Setup Screen is displayed.

4. Press LCD CLEAR on the Main Setup Screen to exit Setup Mode.

5. The Keypress Beep feature is now turned on or off, depending on the previous state it

was in.

LCD Touchscreen Display Time

You can choose the length of time the touchscreen remains on after the last keypress. The

power-on default is 30 seconds from the last keypress. Setting the LCD Touchscreen Display

Time also changes the length of time the Backlight stays on, if activated.

To change the LCD Touchscreen Display Time, follow these steps:

1. Press and hold the SETUPkey on the rubber keypad until the LED

indicator light remains on and the touchscreen shows the Main Setup

Screen. This process takes

approximately 2-3 seconds.

2. Release the SETUPkey.

3. Press and release the SETUPkey again. The LED indicator light blinks

to acknowledge the keypress and the Digit Setup Screen is shown.

4. Press and release a digit key (1-9) to indicate the length of time you

wish the touchscreen to remain on. (The RM24941 can only accept the

following options: 1=10 seconds; 2=20 seconds; 3=30 seconds, etc.)

Ninety seconds is the longest length of time allowable. The LED indica-

torblinks once to acknowledge the keypress.

5. Press and release the LCD ENTERkey to save the setting. The touch-

screen returns to the Main Setup Screen.

6. The LCD Touchscreen Display Time setting is now complete.

7. Press LCD CLEARon the Main Setup Screen to exit Setup Mode.

14

24941manual 8/13/03 8/19/03 8:42 AM Page 16

Contents

Main Table of Contents Battery Installation Battery Saver Code Saver Power-on Default Battery Information LCD Touchscreen LED Indicator Light Setup Routine and Procedures Device Control Screens Code Entry Library Code Entry Library Code Entry (continued) Code Search Code Search (continued) Code Autosearch Code Identification Code Identification Chart 6 Key Label Options Page Learn Commands Learning Tips Code Learning Learn Commands Clear All Stored Learned Commands Under a Mode Master Clear Sleep Timer Method 1 (From Normal Operation) Method 2 (From Setup Routine) Notes TV or Audio Volume Punch-Through VCR Punch-through Record Key Additional Features Keypress Beep Feature LCD Touchscreen Display Time Backlighting Master Reset All Power Off Feature Glossary of Terms 24941manual 8/13/03 8/19/03 8:42 AM Page 19 Troubleshooting 24941manual 8/13/03 8/19/03 8:42 AM Page 20 NOTE: Reprogramming may be required after batteries are removed. 90 Day Limited Warranty Lost Your Codes? Tabla del Contenido La Instalacin de la batera El Salvador de la batera Codifique a Salvador El poder en la Rebelda La Informacin de la Batera LCD Touchscreen La Luz LED del Indicador La Rutina de arreglo y Procedimientos El Control del dispositivo Selecciona Codifique la Entrada La Entrada del Cdigo de la Biblioteca La Entrada del Cdigo de la Biblioteca (continuado) Codifique la Bsqueda Codifique la Bsqueda (continuado) Codifique Autosearch Codifique Identificacin Las Opciones claves de la Etiqueta Page Aprenda las Ordenes Las Puntas que aprenden El cdigo Aprendiendo Aprenda las Ordenes Limpie Todas Ordenes Aprendidas Almacenadas Bajo un Modo Magistral Limpia Duerma el Reloj El mtodo 1 (De la Operacin Normal) El mtodo 2 (De la Rutina de Arreglo) Notas La televisin o el Puetazo del Volumen de la Audiofrecuencia Por El Puetazo de VCR por Registre Llave Las Caractersticas adicionales La Caracterstica de pip pip de Keypress El Tiempo del Despliegue de LCD Touchscreen El Tiempo del Despliegue de LCD Touchscreen (contd.) Backlighting El maestro Repone Todo Poder De la Caracterstica Glosario de Trminos Page La localizacin de fallas 24941manual 8/13/03 8/19/03 8:42 AM Page 40 La NOTA: Reprogramming se puede requerir despus que bateras se quitan. La Garanta Limitada de 90 das Perdi Sus Cdigos? CABLE 030878 24941 6 CABLE Universal Touchscreen Learning Remote 24941manual 8/13/03 8/19/03 8:42 AM Page 42 RM24941