this sequence, EzSet will automatically adjust the output levels for all channels until they are equal, as shown by the Program/SPL Indicator c lighting green for each channel. Press this button again when the adjustment is complete to turn off the test tone. (See page 27 for more information on EzSet.)
42Learn Button: Press this button to begin the process of “learning” the codes from another product’s remote into the AVR580’s remote. (See page 41 for more information on using the remote’s learning function.)
43Mute: Press this button to momen- tarily silence the AVR580 or TV set being controlled, depending on which device has been selected. When the AVR580 remote is being programmed to operate another device, this button is pressed with the Input Selector Button e to begin the programming process. (See page 41 for more information on programming the remote.)
44EzSet Sensor Microphone: The sensor microphone for the EzSet micro- phone is behind these slots. When using the remote to calibrate speaker output levels using EzSet, be sure that you do not hold the remote in a way that covers these slots. (See page 27 for more infor- mation on using EzSet.)
15
